Stabilizer Bar, Removing And Installing: Removing

-- Remove The Noise Insulation. Refer To NOISE INSULATION, REMOVING AND INSTALLING .

A5 THROUGH AUGUST 2007 

Fig 1: Identifying Stabilizer Bar And Nuts & Clamps

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect Left And Right Connectors -2-.

-- Remove The Left And Right Nuts -1- And Remove The Clamps -3-.

-- Remove The Stabilizer Bar.

A4/A5 FROM SEPTEMBER 2007 

Fig 2: Identifying Nuts (Install But Do Not Tighten)

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect Left And Right Connectors -2-.

-- Remove The Left And Right Nuts -1- And Remove The Clamps -3-.

-- Remove The Stabilizer Bar.