LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 63 (Front Suspension (Front Axle - Drive Axle) (Coupe)) >> 40 Front Suspension >> SUBFRAME >> Diagonal Brace, Removing And Installing >> Installing >> Notes

Diagonal Brace, Removing And Installing: Installing: Notes

WARNING: This page is about a different variant/trim than selected.

Installation Is The Reverse Of Removal, With Special Attention To The Following: 

NOTE:

The Stamped Edge On The Diagonal Brace Near The Bolt Holes Must Be On The Bolt Head Side.

Pay Attention To The Tightening Sequence And The Pre-Tightening Specification.

scientia non olet · About LEMON Manuals