LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 63 (Front Suspension (Front Axle - Drive Axle) (Coupe)) >> 40 Front Suspension >> SUBFRAME >> Diagonal Brace, Removing And Installing >> Installing >> Installed Position And Tightening Sequence:

Installed Position And Tightening Sequence:

WARNING: This page is about a different variant/trim than selected.
Fig 1: Installing Diagonal Brace (-Arrow- Faces Direction Of Travel)
GWWA40-10375Courtesy of AUDI OF AMERICA, LLC

-- Install The Diagonal Brace (-Arrow- Faces The Direction Of Travel).

-- First Tighten The Bolts To 5 Nm In Sequence -1, 2 And 3- And Then Tighten Them To The Final Tightening Specification. Refer To -Item  ) OVERVIEW - SUBFRAME, A5 FROM 09/2007 - BOLT.

Tightening Specifications. Refer To OVERVIEW - SUBFRAME .

scientia non olet · About LEMON Manuals