LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 63 (Front Suspension (Front Axle - Drive Axle) (Coupe)) >> 40 Front Suspension >> Lower Control Arm And Ball Joint >> Overview - Lower Control Arm And Ball Joint >> Nut Versions For The Control Arm And Guide Control Arm Bracket

Nut Versions For The Control Arm And Guide Control Arm Bracket

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Nut Versions For Control Arm And Guide Control Arm Bracket
GWWA40-10351Courtesy of AUDI OF AMERICA, LLC

Tightening Specification: 145 Nm 

Tightening Specifications: 110 Nm 

Tightening Specification: 120 Nm 

Tightening Specification: 140 Nm 

scientia non olet · About LEMON Manuals