Lower Transverse Link: Removing

Fig 1: Dimension From Center Of Wheel To Lower Edge Of Wheel Housing

Courtesy of AUDI OF AMERICA, LLC

-- Determine dimension -a- from the center of the wheel to the lower edge of the wheel housing before starting work while the vehicle is resting on its wheels.

-- Place the vehicle on a hoist.

-- Remove the wheel.

-- Remove coil spring. Refer To COIL SPRING .

-- On vehicles with a level control system sensor -1-, remove the bolt -2-.

Fig 2: Identifying Level Control System Sensor And Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove bolt -4-.

Fig 3: Identifying Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove nut -3-.

Fig 4: Bolt -1- And Spacer Tube -2- And Nut -3-

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and the spacer tube -2-.

-- Remove bolt -1-.

Fig 5: Identifying Lower Control Arm And Bolt

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -3- and bolt -2-.

-- Remove lower transverse link.