Inner CV Joint, 100 Mm Diameter Or 108 Mm Diameter With Cap: Notes
WARNING: This page is about a different variant/trim than selected.
Special Tools And Workshop Equipment Required
- Torque wrench:V.A.G 1331
- CV joint boot clamp tool:3340
- CV joint boot clamp tool:V.A.G 1682
- Thrust plate:VW 401
- Thrust plate:VW 402
- Punch:VW 408 A
- Support sleeve:VW 522
- Circlip pliers (commercially-available)
- Copper or brass drift
- Sealant. Allocation, Refer To the Parts Information..