LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 62 (REAR SUSPENSION (2 Of 2) (COUPE)) >> 42 Rear Suspension >> Diagnosis And Testing >> Outer CV Joint, Checking >> Assembling

Outer CV Joint, Checking: Assembling

WARNING: This page is about a different variant/trim than selected.

-- Insert cage with hub into joint body.

NOTE:

Cage must be installed laterally correct.

-- Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be established again.

-- Press grease into joint body.

Grease capacities and types, drive axle with 88 mm diameter or 100 mm diameter outer CV joint. Refer To DRIVE AXLE OVERVIEW, WITH 88 MM DIAMETER OUTER CV JOINT AND 100 MM DIAMETER INNER CV JOINT .

scientia non olet · About LEMON Manuals