Central Valve: Installing

WARNING: This page is about a different variant/trim than selected.

-- Install in reverse order of removal. Note The Following:

Tightening Specifications, refer to CENTRAL VALVES OVERVIEW

-- Install the central valve and bracket.

-- Install the bolts.

-- Install the DRC line connections for the appropriate lines on the central valve.

NOTE:

The New Central Valve Is Filled And The Shut-Off Valves Are Closed.

Only when a new central valve is installed: open the shut-off valve on the new central valve and secure them with a locking nut. Refer to CENTRAL VALVES OVERVIEW .

Fill the DRC system. Refer to DYNAMIC RIDE CONTROL (DRC), DRAINING AND FILLING .