LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (Body Front (Coupe)) >> 50 Body Front >> Fender >> Fender Seal, Removing And Installing

Fender Seal, Removing And Installing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Fender Seal Components
GWWA50-10232Courtesy of AUDI
  1. Seal
    • Self-adhesive.
    • Remove the protective film and slide the seal onto the fender mounting flange under the wheel housing liner as illustrated.
  2. Fender Flange
    • Slide the seal onto the fender flange between the wheel housing liner and the inside of the fender.
  3. Fender
  4. Wheel Housing Liner
scientia non olet · About LEMON Manuals