LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 60 (Body Front (Coupe)) >> 50 Body Front >> Fender >> Fender Brace, Removing And Installing

Fender Brace, Removing And Installing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Fender Brace With Components
GWWA50-10223Courtesy of AUDI
  1. Brace

    -- Loosen the wheel housing liner in the area of the brace and press it to the side.

    -- To remove, remove nuts -2- on the longitudinal member and nuts -6 - on fender.

  2. Nut
    • 8 Nm 
      NOTE:

      The brace is secured on the right side with bolts tightened to 10 Nm.

  3. Longitudinal Member
  4. Fender
  5. Bumper Cover Bracket
  6. Nut
    • 4 Nm 
scientia non olet · About LEMON Manuals