Special Tools
WARNING: This page is about a different variant/trim than selected.
Special tools and workshop equipment required
- Press Tube 30 - 100
- Puller T10037
- Counterhold Tool Touareg V10 T10172 with Adapter T10172/5
- Gearbox Support T10337
- Pulling Hook T20143
- Thrust Piece T40163
- Thrust Piece for Final Drive at Gearbox T40165
- Oil Seal Installing Tool T40239
- Torque Wrench 5-50 Nm V.A.G 1331
- Engine-/Gearbox Jack V.A.G 1383 A
- Oil Collecting and Extracting Device V.A.G 1782
- Thrust Plate VW 401
- Thrust Plate VW 402
- Thrust Disc VW 412
- Needle Bearing Drift VW 295
- Not illustrated:
- Guide Sleeve T40239/1