Installing Shaft Seal

Fig 1: Identifying Seal For Rear Flange Shaft, Installation

Courtesy of AUDI OF AMERICA, LLC

Lightly coat the shaft seal on the outer circumference with oil and then install it. Do not bend the seal.

-- Fill the space between the sealing and dust lip half way with sealing grease G 052 128 A1.

Install the flange shaft.

Fig 2: Installing Flange Shaft

Courtesy of AUDI OF AMERICA, LLC

• The flange shaft ball bearing in installed.
• When installing, the sleeve 30 - 100 presses on the inner race of the ball bearing.

-- Mount the flange shaft seal -arrow-.

Fig 3: Identifying Circlip -Arrow-

Courtesy of AUDI OF AMERICA, LLC

-- Install the center differential and housing CENTER DIFFERENTIAL, TRANSMISSION INSTALLED .