Rain/Light Recognition Sensor - G397-, Removing And Installing, From My 2013: Removing

Fig 1: Locating Screwdriver

Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition.

-- Vehicles with ignition lock: Remove the ignition key.

-- Remove the interior rearview mirror. Refer To INTERIOR REARVIEW MIRROR, REMOVING AND INSTALLING .

-- Disconnect the connector -3-.

-- Insert a narrow screwdriver -5- into the opening as shown and release the retainers on the spring -2- -arrows-.

-- Wait one minute so that the silicone pad can be removed without leaving any residue.

-- Loosen the Rain/Light Recognition Sensor -G397- -Item 4- by moving it back and forth and remove it from the mount -1-.

Fig 2: Locating Rain/Light Recognition Sensor

Courtesy of AUDI OF AMERICA, LLC