Windshield Washer Fluid Level Sensor, Removing And Installing: Removing

Fig 1: Identifying Washer Fluid Level Sensor

Courtesy of AUDI OF AMERICA, LLC

-- Turn Off The Ignition And Remove The Key.

-- Remove The Left Front Wheel.

-- Remove The Left Front Wheel Housing Liner. Refer To FRONT WHEEL HOUSING LINER, REMOVING AND INSTALLING, AUDI RS5 .

-- Disconnect The Connector -1-.

-- Place A Drip Tray Under The Windshield Washer Fluid Reservoir.

-- Remove The Windshield Washer Fluid Level Sensor -G33- -Item 3- From The Washer Fluid Reservoir -4-.