Washer Fluid Reservoir Filler Tube, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Alarm Horn, Removal

Courtesy of AUDI OF AMERICA, LLC

Vehicles Through 05/2008:

-- Remove the seal -arrow- near the windshield wiper fluid reservoir filler tube.

-- Unclip the plenum chamber cover -3- and remove it.

NOTE:

Ignore Items -1 and 2-.

Vehicles From 06/2008:

Fig 2: Identifying Plenum Chamber Cover

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

Continuation For All Vehicles:

Fig 3: Identifying Filler Neck With Filler Tube From Washer Fluid Reservoir And Opening In Body

Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -1- and tilt the windshield wiper fluid container filler tube slightly upward -arrow A-.

-- Remove the filler neck -2- with filler tube from the washer fluid reservoir and the body opening -arrow B-.