Spray Nozzles, Adjusting
WARNING: This page is about a different variant/trim than selected.
-- Adjust The Spray Nozzles For The Windshield Washer System. Refer To the appropriate Service Information
-- Clean the dirty spray nozzle if the spray field does not match the specifications.
Spray Nozzle, Cleaning:
CAUTION:
Risk Of Damage.
- Do Not Use Any Objects To Clean The Spray Nozzles!
-- Remove The Spray Nozzle. Refer To SPRAY NOZZLES, REMOVING AND INSTALLING .
-- Flush The Nozzle Opposite To Spray Direction Using Clear Water.
-- To Remove Remaining Impurities, The Nozzle Must Only Be Blown Out Opposite To Spray Direction Using Compressed Air.
-- If The Spray Field Still Does Not Match The Specifications, Replace The Spray Nozzle.