Overview - Impact Member, Vehicles Through My 2011 Except AUDI RS5

Fig 1: Identifying Front Bumper Impact Member Overview

1. Impact Member
   • Removing and installing. Refer to IMPACT MEMBER, REMOVING AND INSTALLING, VEHICLES THROUGH MY 2011 .
2. Low Tone Horn -H7-
   • Removing and Installing. Refer to Horn .
3. Right Spacer
   • For the bumper cover
4. Right Impact Bar Mount
   • Removing and installing. Refer to Installing => Right Mount .
5. High Tone Horn -H2-
   • Removing and Installing. Refer to Horn .
6. Bolt
   • 30 Nm
7. Left Spacer
   • For the bumper cover
8. Bolt
   • 4 Nm
   • Secures the lock carrier
9. Bolt
   • 30 Nm
10. Left Impact Member Mount
    • Removing and installing. Refer to IMPACT MEMBER MOUNT, REMOVING AND INSTALLING FOR VEHICLES THROUGH MY 2011 => Left Mount .
11. Bolt
    • 20 Nm
12. Nut
    • Tightening specification. Refer to Horn .