Overview - Bumper Cover, Except AUDI S5 And AUDI RS5
WARNING: This page is about a different variant/trim than selected.
- Bolt
- 3 Nm
- Bolt
- 1.5 Nm
- Bumper Cover End Plate
- Removing and installing. Refer to ATTACHMENTS, REMOVING AND INSTALLING, EXCEPT AUDI RS5 => Bumper Cover End Plate .
- Cover
- For the towing hook
- Bumper Cover
- Removing and installing. Refer to BUMPER COVER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Right Front Parking Aid Sensor -G252-
- Removing and Installing. Refer to Parking Aid .
- Radiator Grille
- Removing and installing. Refer to RADIATOR GRILLE, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Bolt
- Tightening specification -item 7- OVERVIEW - RADIATOR GRILLE, EXCEPT AUDI RS5 => List Item:Bolt .
- Lock Carrier Cover
- Removing and installing. Refer to LOCK CARRIER COVER, REMOVING AND INSTALLING .
- Expanding Rivet
- There are different versions. Refer to the Parts Catalog.
- Remove the clamping pin when removing.
- Only press the clamping pin in when installing.
- Impact Absorber
- Removing and installing. Refer to IMPACT ABSORBER, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Left Front Parking Aid Sensor -G255-
- Removing and Installing. Refer to Parking Aid .
- Front Bumper Cover Mount
- Removing and installing. Refer to BUMPER GUIDE PIECES, REMOVING AND INSTALLING .
- Bolt
- 4 Nm
- Nut
- 4 Nm
- Fog Lamp
- Removing and Installing. Refer to Fog Lamp .
- Air Intake Grille
- Removing and installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, EXCEPT AUDI RS5 .
- Bolt
- 3 Nm
- Bolt
- 1.5 Nm