LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Rear Lid >> Lid Latch, Removing And Installing

Lid Latch, Removing And Installing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Exploded View Of Rear Lid Latch With Nuts
GWWA55-10285Courtesy of AUDI OF AMERICA, LLC
  1. Cover
    • Before removing the lid trim, remove from the lid latch
  2. Nut
    • 21 Nm 
  3. Cover for Lid Latch
    • When installing, cover must engage audibly in lid latch.
  4. Lid Latch
    • Before removal, remove the lid latch cover.
    • Remove the rear lid trim panel. Refer to LOWER REAR LID TRIM PANEL, REMOVING AND INSTALLING
    • Disconnect the connector.
    • If necessary, disengage the emergency release cable.
    • Remove nuts and remove lid latch.
    • Remove the lid latch with the clip from the centering hole.
  5. Centering Hole
  6. Centering Clip
    • To install, first press the lid lock with the clip into the centering hole.
scientia non olet · About LEMON Manuals