LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Rear Lid >> Gas-Filled Strut, Removing And Installing >> Removing

Gas-Filled Strut, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.
Fig 1: Identifying Gas Filled Strut -1- And Ball Pin -2-
GWWA55-10323Courtesy of AUDI OF AMERICA, LLC

-- Lift the retaining springs -arrow- on the gas-filled strut -1- slightly using a small screwdriver and remove it from the ball stud -2-.

scientia non olet · About LEMON Manuals