LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Rear Lid >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.

Install In Reverse Order Of Removal While Noting The Following: 

-- To install, press gas-filled strut onto ball head pins so that it engages in position.

scientia non olet · About LEMON Manuals