LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Hood >> Overview - Gas-Filled Strut

Overview - Gas-Filled Strut

WARNING: This page is about a different variant/trim than selected.
Fig 1: Gas-Filled Strut
GWWA55-10308Courtesy of AUDI OF AMERICA, LLC
  1. Gas-Filled Strut
    • To remove securing spring -arrow-, raise slightly and remove gas-filled strut from ball stud.
      NOTE:

      Ensure correct positioning during installation: the gas-filled strut tube must be attached on the body-side.

  2. Hood
  3. Ball Pin
    • 21 Nm 
scientia non olet · About LEMON Manuals