LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Hood >> Impact Guard, Removing And Installing

Impact Guard, Removing And Installing

WARNING: This page is about a different variant/trim than selected.
NOTE:

The impact guard is also equipped with double-sided adhesive tape.

Fig 1: Identifying Impact Guard (Equipped With Double-Sided Adhesive Tape)
GWWA55-10306Courtesy of AUDI OF AMERICA, LLC
  1. Door
  2. Impact Guard
    • To remove, remove the clip from the hood and then remove the impact guard.
  3. Clip