LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 56 (Hood, Lids (Coupe)) >> 55 Hood, Lids >> Hood >> Gas-Filled Strut, Removing And Installing >> Installing

Gas-Filled Strut, Removing And Installing: Installing

WARNING: This page is about a different variant/trim than selected.
NOTE:

After Complete Removal Of The Gas-Filled Strut Ensure Correct Positioning During Installation: The Gas-Filled Strut Tube Must Be Attached On The Body-Side.

-- Press Gas-Filled Strut Onto Ball Stud And Engage.

scientia non olet · About LEMON Manuals