Inner Door Seal, Removing And Installing
WARNING: This page is about a different variant/trim than selected.
- Lower Door Seal
- Before removal, remove the sill panel trim and the lower A-pillar trim panel. Refer to PASSENGER COMPARTMENT TRIM .
- Loosen or unclip the rear side trim panel in the area of the door seal. Refer to PASSENGER COMPARTMENT TRIM
.
-- Remove the lower door seal from the body flange and under the upper door seal.
-- When installing the front and rear door seal, first slide it under the upper door seal and then press it onto the body flange.
- Upper Door Seal
- Loosen or unclip the rear side trim panel and B-pillar trim panel in the area of the door seal. Refer to PASSENGER COMPARTMENT TRIM .
- Remove the upper A-pillar. Refer to PASSENGER COMPARTMENT TRIM
.
-- Remove the upper door seal on the A-pillar and B-pillar, then pull it off the body flange.
- Sill Panel Cover
- Removed. Refer to PASSENGER COMPARTMENT TRIM .
- Headliner
- Pull downward around the upper door seal
- Upper B-Pillar
- Removed. Refer to B-PILLAR TRIM, REMOVING AND INSTALLING .