LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 54 (Communication (Infotainment Systems) (Coupe)) >> 91 Communication >> Infotainment System >> Overview - Infotainment System >> Overview - Infotainment, From 11 / 03 / 2008

Overview - Infotainment, From 11 / 03 / 2008

WARNING: This page is about a different variant/trim than selected.

The MMI From 11 / 03 / 2008 An Advancement Of The MMI Currently In Use. The External Audio Source Connection, Cell Phone Preparation, CD- And DVD Drives And Navigation (With Hard Disc Drive) Are Integrated In One Unit Information Electronics Control Module 1 -J794-.

The Radio - R- / CD Changer -R41- And The Digital Sound System Control Module -J525- Are Connected Via The MOST Bus. The Basis Sound Systems Are Controlled Directly By The Radio -R-. Satellite Radio -R146- (SDARS) Is An Optional Integration In The Radio -R-

MMI Maximum Equipment 

Fig 1: Identifying MMI (From 1 June 2009)
GWWA91-10018Courtesy of AUDI OF AMERICA, LLC
  1. Multimedia System Control Head -E380- in the center console
  2. Radio / Telephone / Navigation System Antenna -R52-, Roof Antenna
  3. Front Information Display Control Head -J685- in center of the instrument panel
  4. Radio / Telephone / Navigation System Antenna -R52-, Roof Antenna
  5. Microphone Unit in Front Roof Module -R164- (Left Front Microphone -R140-) in the Front Interior Lamp -W1-
  6. not installed
  7. Information Electronics Control Module 1 -J794- inside the instrument panel
  8. MOST Bus
  9. CVBS cable
  10. CD Changer -R41- in glove compartment
  11. not installed
  12. External Audio Source Connection -R199- (AUX IN jack) in the center console storage compartment
  13. Radio -R- behind the left luggage compartment side trim panel
  14. Digital Sound System Control Module -J525- behind the luggage compartment left side trim
  15. Data Bus On Board Diagnostic Interface -J533- Behind the Glove Compartment On the Left Side
  16. Microphone Unit in Front Roof Module -R164- (Right Front Microphone -R141-) in the Front Interior Lamp -W1-

The MOST Bus performs the system data exchange in the MMI.

The connection to the other data bus systems in the vehicle are provided by the Data Bus On Board Diagnostic Interface -J533-.

Fault finding is performed via "Guided Fault Finding  " on the Vehicle Diagnostic Tester.

Information Electronics Control Module 1 -J794- overview

Information Electronics Control Module 1 -J794- is a 3rd generation MMI. Depending on the equipment level, the Information Electronics Control Module 1 -J794- contains the following known control modules from the 2nd generation:

Fig 2: Identifying Information Electronics Control Module 1 -J794- MMI Overview
GWWA91-11271Courtesy of AUDI OF AMERICA, LLC
  1. Front Information Display Control Head Control Module -J523-
  2. CD Player -R89-
  3. Navigation System with CD Drive Control Module -J401-
  4. SD memory card reader
  5. not installed
  6. Bluetooth hands-free calling
  7. Telephone Transceiver -R36- (cell phone preparation)
  8. Internal hard drive (HD) disc storage
  9. Information Electronics Control Module 1 -J794-

Radio -R- Overview

Depending On The Equipment Level, The Radio -R- Contains The Following Known 2nd Generation Control Modules:

Fig 3: Identifying Radio -R- MMI Overview
GWWA91-11299Courtesy of AUDI OF AMERICA, LLC
  1. Digital Sound System Control Module -J525-
  2. Radio -R-
  3. Radio -R- (AM / FM-Tuner)
  4. Satellite Radio -R146-
  5. not installed

MOST Bus Overview 

Fig 4: Identifying MOST Bus MMI
GWWA91-11300Courtesy of AUDI OF AMERICA, LLC
  1. Front Information Display Control Head -J685-
  2. Information Electronics Control Module 1 -J794-
  3. MOST Bus
  4. CD Changer -R41-
  5. not installed
  6. Radio -R-
  7. Digital Sound System Control Module -J525-
  8. Data Bus On Board Diagnostic Interface -J533-
  9. Multimedia System Control Head -E380-

Notes On MOST Bus

The optical Data bus "MOST Bus" is used in addition to the CAB Bus.

A fiber-optic cable is used as a "connecting cable". Fiber optic cables are routed inside corrugated tubes for protection.

Replace complete fiber optic cable if possible.

Make sure that the face surfaces of the connectors do not become soiled.

If disconnecting the connectors: Attach Fiber-Optic Repair Set - Connector Protective Caps:VAS6223 / 9  .

When installing fiber optic cables, make sure not to go below the minimum bending radius of 25 mm. Do not crush or kink fiber optic cables.

Repairing Fiber Optic Cables, Refer To FIBER-OPTIC CABLES, REPAIRING .