Cd Changer -R41-, Removing And Installing, From 11 / 03 / 2008: Removing
WARNING: This page is about a different variant/trim than selected.
-- Open the glove compartment.
-- Insert two clips from the Radio Removal Tool:T10057 into release slots on CD Changer -R41- until they engage. Points on the grip eyelets of tool face outward.
-- Remove CD Changer -R41- from mounting frame.
-- Disconnect all of the connectors from the CD Changer -R41-.
-- Insert the Fiber-Optic Repair Set - Connector Protective Caps:VAS6223 / 9 -1- onto the MOST Bus connector -2-.
-- Remove Radio Removal Tool:T10057 by pushing locking tabs on CD Changer -R41-.