Sealing Flange Cover - Tightening Specifications

WARNING: This page is about a different variant/trim than selected.

Fig 1: Identifying Cover Bolts For Locking Flange

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts -arrows- to 1.5 Nm.

Fuel Filler Tube Ground (GND) Connection

Fig 2: Fuel Filler Tube Ground (GND) Connection

Courtesy of AUDI OF AMERICA, LLC

-- Make sure the filler tube threaded connections -1 and 2- are free of corrosion so the GND connection to the body is not affected.

WARNING:

Risk of explosion due to electrostatic charge.

After installing, check electrical connection on fuel filler neck metal ring to an empty spot on the body using an Ohm meter.