Overview - Fuel Tank, Vehicles With Fwd And AWD: Notes
WARNING: This page is about a different variant/trim than selected.
- Bolt
- Exhaust System Suspended Mount
- Mounting Strap
- Fuel Line
- From the fuel filter to the engine
- Do not kink
- Clipped to the fuel tank
- To disconnect, press release button on connection piece. Refer to CONNECTOR COUPLINGS, SEPARATING .
- Bolt
- 6 Nm
- Protective Plate
- For the fuel filler tube
- Overflow Hose
- Attached to the bumper bracket
- Rubber Gasket
- Cap
- Turn until it clicks and locks.
- Attached to tank flap unit with fastening device
- Bolt
- 20 Nm
- To attach the fuel filler neck
- Discharging electrostatic charge. Refer to Figure.
- Fuel Tank
- Removing and Installing. Refer to FUEL TANK WITH ATTACHMENTS, REMOVING AND INSTALLING, VEHICLES WITH FWD AND AWD .
- Breather Line
- To the EVAP canister
- Do not kink
- To disconnect, press release button on connection piece. Refer to CONNECTOR COUPLINGS, SEPARATING .
- Clipped to the fuel tank
- Fuel Tank Heat Shield
- Nut
- 2 Nm
- Nut
- 2 Nm
- Support Plate
- Fuel Tank Heat Shield
- Nut
- 2 Nm
- Bolt
- 20 Nm
- Nut
- 2 Nm
- Expanding Clip