Overview - Fuel Tank, Rest Of World Vehicles With Fwd: Notes

Fig 1: Exploded View Of Fuel Tank, Rest Of World Vehicles With FWD

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • Tightening specification. Refer to EXHAUST PIPES/MUFFLERS [For engine(s) CAED, CAEB, CPMB, CPMA] or EXHAUST PIPES/MUFFLERS [For engine(s) CALA] or EXHAUST PIPES/MUFFLERS [For transmission(s) 0B6] [For engine(s) CAUA] or EXHAUST PIPES/MUFFLERS [For engine(s) CFSA] .
2. Exhaust System Suspended Mount
3. Mounting Strap
   • Different lengths
4. Fuel Line
   • From the fuel filter to the engine
   • Do not kink
   • Clipped to the fuel tank
   • To disconnect, press release button on connection piece. Refer to CONNECTOR COUPLINGS, SEPARATING .
5. Fuel Line
   • Only vehicles with a parking heater: to the parking heater metering pump
   • Do not kink
   • Clipped to the fuel tank
   • To disconnect, press release button on connection piece. Refer to CONNECTOR COUPLINGS, SEPARATING .
6. Overflow Hose
   • Attached to the bumper bracket
7. Rubber Gasket
8. Cap
   • Turn until it clicks and locks.
   • Attached to tank flap unit with fastening device
9. Bolt
   • To attach the fuel filler neck
   • Discharging electrostatic charge Figure.
   • 20 Nm
10. Fuel Tank
    • Removing and Installing. Refer to FUEL TANK WITH ATTACHMENTS, REMOVING AND INSTALLING, REST OF WORLD VEHICLES WITH FWD .
11. Fuel Tank Heat Shield
12. Nut
    • 2 Nm
13. Breather Line
    • To the EVAP canister
    • Do not kink
    • Clipped to the fuel tank
    • To disconnect, press release button on connection piece. Refer to f CONNECTOR COUPLINGS, SEPARATING .
14. Fuel Tank Heat Shield
15. Mounting Strap
    • Different lengths
16. Nut
    • 2 Nm
17. Bolt
    • 20 Nm
18. Nut
    • 2 Nm
19. Expanding Clip

-- Tighten the bolts -arrows- to 1.5 Nm.