C - Checking Residual Pressure
WARNING: This page is about a different variant/trim than selected.
-- Watch the pressure fall on the Pressure Tester Kit:VAS6550 while checking the holding pressure and checking for leaks:
- After 10 minutes there must be a residual pressure of at least 3 bar (43 psi).
If the Residual Pressure Drops Below 3 bar (43 psi)
- Check fuel lines and their connections for leaks.
- The fuel pump check valve in the fuel pump leaks: replace the fuel delivery unit. Refer to FUEL DELIVERY UNIT/FUEL LEVEL SENSOR, REMOVING AND INSTALLING .