Transfer Fuel Pump -G6-, CHECKING, A5 FROM MY 2012, A4 FROM MY 2013 WITH 4-CYLINDER AND 6-CYLINDER ENGINES, RS5 FROM MY 2012, RS4: Assembling

Assembly is performed in the reverse order of disassembly, noting the following:

• The ignition must be off.

NOTE:

Decrease the fuel pressure by opening the drains -B and C- and letting the fuel run into the measuring container before removing the pressure gauge -1-.

Fig 1: Identifying Shut-Off Valves A And B On Pressure Tester Kit

Courtesy of AUDI OF AMERICA, LLC

-- Remove the Pressure Tester Kit:VAS6550  with the connecting lines.

-- Attach the fuel supply line so that it clicks into place.

-- Press the fuel supply line on again and pull to make sure the connector coupling is engaged correctly.