Suction Line, Removing And Installing: Removing

WARNING: This page is about a different variant/trim than selected.

-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .

-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .

-- Remove the Fuel Level Sensor 2 -G169-. Refer to Fuel Level Sensor 2 -G169-, REMOVING AND INSTALLING .

-- Carefully remove the Fuel Level Sensor 2 -G169- -3- with the suction line -1- from the fuel tank opening.

Fig 1: View Of Fuel Suction Line -1-, Connector -2- And Fuel Level Sensor 2 -G169- -3-

Courtesy of AUDI OF AMERICA, LLC

NOTE:

When removing, do not bend the floater arm on the Fuel Level Sensor 2 -G169-.

-- Disconnect the connector -2- by pressing the release -arrow A-.

-- Press the bracket together with needle nose pliers -B arrows- and remove the suction line.