EVAP Canister, Removing And Installing, Rest Of World Vehicles: Removing
WARNING: This page is about a different variant/trim than selected.
-- Follow all safety precautions. Refer to SAFETY PRECAUTIONS .
-- Follow the guidelines for clean working conditions. Refer to GUIDELINES FOR CLEAN WORKING CONDITIONS .
-- Remove the left rear underbody panel. Refer to UNDERBODY TRIM PANEL .
-- Remove the breather line -1-. Refer to CONNECTOR COUPLINGS, SEPARATING .
-- Disconnect the breather line -3- to the fuel tank. Refer to CONNECTOR COUPLINGS, SEPARATING .
-- Disconnect the vent line -5- to the EVAP Canister Purge Regulator Valve 1 - N80- by pressing the release button.
-- Remove the bolts -2, 4 and 6- and remove the EVAP canister.