Overview - Accelerator Pedal Mechanism
WARNING: This page is about a different variant/trim than selected.
- Accelerator Pedal Module
- With Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-
- Removing and Installing. Refer to ACCELERATOR PEDAL POSITION SENSORS -G79- / -G185-, REMOVING AND INSTALLING .
- Depending on the engine/transmission version, adaptation in the "Guided Functions" operating mode is necessary after replacing it.
- Perform the adaptation, if a menu item is available in the "Guided Function" using theVehicle Diagnostic Testerr.
- Pedal Bracket
- Bolt
- 8 Nm
- Connector