Windshield Spray Nozzles, Adjusting

WARNING: This page is about a different variant/trim than selected.

-- Unlock the long cover -1- on the wiper spray nozzle adjusting tool:T40187 -arrow A- and push it toward the rear -arrow B-.

Fig 1: Identifying T40187

Courtesy of AUDI OF AMERICA, LLC

-- Mount the adjusting pin -2- on the spray nozzle -arrow- in the nozzle unit -1- and make a mark the positions on the windshield.

Fig 2: Place Adjusting Pin -2- On Respective Nozzle -Arrow- Of Nozzle Unit -1

Courtesy of AUDI OF AMERICA, LLC

-- If the spray field does not conform the to specifications, then clean the spray nozzle. Refer to .