Vehicle Tester, Connecting

WARNING: This page is about a different variant/trim than selected.

WARNING:

Always secure the testing and measuring equipment on the rear seat when performing a road test.
Drivers must NEVER operate these tools while driving.

Special Tools And Workshop Equipment Required

Vehicle Diagnosis, Testing and Information System:VAS 5052A

Fig 1: Identifying VAS 5052 Vehicle Diagnostic And Service Information System
Courtesy of AUDI OF AMERICA, LLC
Or: Laptop Diagnostic Unit:VAS 6150 A
Diag.Cable For VAS5052 (2 meter):VAS 5052/3 A

Fig 2: Diag. Cable For VAS 5052 (2 Meter) VAS 5052/3 A
Courtesy of AUDI OF AMERICA, LLC
Remote diagnosis head:VAS 5054A
Diagnosis interface:VAS 5055
USB Bluetooth adapter:VAS 5054/2

NOTE:

Make Sure The Selected Vehicle Diagnostic Tester Is Only Used With The Accompanying Diagnostic Cable.

Perform The Following Procedure:

Fig 3: Identifying Diagnostic Cable Connector

Courtesy of AUDI OF AMERICA, LLC

-- Connect the diagnostic cable connector to the diagnostic connection.

-- Turn on the vehicle diagnostic tester.

-- Turn on the ignition.

-- Follow the menu on the screen to start the desired function.