Ignition Coil, Lubricating

WARNING: This page is about a different variant/trim than selected.

NOTE:

Follow All Disposal Regulations.

-- Apply a thin bead of spark plug grease:G 052 141 A2 all around the sealing hose on the ignition coil -arrow-. The bead of grease must be 1 to 2 mm thick.

Fig 1: Applying Thin Bead Of Special Lubricant Around Ignition Sealing Hose

Courtesy of AUDI OF AMERICA, LLC

NOTE:

New ignition coils are delivered already lubricated. It is not necessary to lubricate them again.

Edition 06052013FB941536JY