Removing Cylinder Bank 1 (Right)

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING .

-- Remove the air filter housing. .

-- Remove the nuts -arrows- and then remove the air filter housing bracket -1-.

Fig 1: Identifying Air Filter Housing Bracket Components

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -1- and -2- from the connector strip.

Fig 2: Identifying Bolts & Ignition Coils Electrical Harness Connectors

Courtesy of AUDI OF AMERICA, LLC

-- Push the connector toward the ignition coil, open the lock by hand and connect the connector to the ignition coils.

-- Move the wiring harness slightly down.