6-Cylinder Gasoline Engine
WARNING: This page is about a different variant/trim than selected.
VERSION 1 REMOVING
-- Carefully remove the engine cover from the 4 pins -arrows-.
NOTE:
Do Not Pull On The Engine Cover Abruptly To Remove It Or Pull On One Side.
VERSION 1 INSTALLING
-- Using both hands, first press the engine cover in the rear onto the pins, and then, using both hands, press the engine cover in the front into the pin.
NOTE:
To Avoid Damage, Do Not Hit Engine Cover With Fist Or A Tool.
VERSION 2 REMOVING
-- Remove the engine cover -1- or -2- upward.
VERSION 2 INSTALLING
-- Position the engine cover -1- or -2- on the engine and push into the clips using both hands.
NOTE:
To Avoid Damage, Do Not Hit Engine Cover With Fist Or A Tool.