Brake Pads, Checking Thickness: Notes

WARNING: This page is about a different variant/trim than selected.

WARNING:

Replace The Brake Pads Once They Have Reached The Wear Limit. Perform The Repairs And Inform The Customer.

Special Tools And Workshop Equipment Required

NOTE:

Use The Thin Measuring Pin (Brake Symbol) To Measure The Brake Pad Thickness.

-- Slide the sliding ring all the way in the direction of the measuring point.

-- Place the tip of the test pin on the brake rotor.

-- Slide the test pin evenly in the direction of the brake pad until the test pin touches the brake pad backing plate.

-- Remove the test pin and read the value on the scale.

NOTE:

Make Sure The Sliding Ring Does Not Move, Otherwise The Measurement Will Be Incorrect.

It is required to remove the wheels for specific tire combinations. Refer to WHEEL BOLTS, TIGHTENING .