Powertrain Overview
WARNING: This page is about a different variant/trim than selected.
- Illustrated with 6-speed manual transmission 0B2 AWD.
NOTE:
-Arrows- point in direction of travel.
- 1 - Engine
- 2 - Drive Plate
- With a needle bearing for the input shaft mounting
- 3 - Clutch Module
- Consists of a pressure plate, clutch plate and the dual mass flywheel with transfer plate
- 4 - Front Differential
- 5 - Input Shaft (main shaft)
- 6 - Front Pinion with Side Shaft
- 7 - Output Shaft
- 8 - Manual Transmission
- 9 - Center Differential
- 10 - Driveshaft
- 11 - Rear Pinion
- 12 - Rear Differential
- I - 1st Gear
- II - 2nd Gear
- III - 3rd Gear
- IV - 4th Gear
- V - 5th Gear
- VI - 6th Gear
- R - Reverse Gear
- S - Intermediate Drive Gear
- A1 - Front Final Drive
- A2 - Rear Final Drive