Perform any subsequent work using the Vehicle Diagnostic Tester.: Notes
WARNING: This page is about a different variant/trim than selected.
-- Turn on the ignition.
VASPC
Vehicle Diagnostic Tester is connected.
-- Select Guided Fault Finding .
-- Press the Go to button and select the "Function/component selection" and the following tree structures one after the other:
- Chassis (Repair group 01; 40 - 49)
- Active steering (Rep.-Gr.48)
- 01 - On Board Diagnostic (OBD) capable systems
- 1B - Active steering | J792
- 1B - Active steering function | J792
- 1B - Basic setting (Rep.Gr.48)