Special Tools

Special tools and workshop equipment required 

• Spreader:3424 
  Fig 1: Identifying Spreader 3424

  Courtesy of AUDI OF AMERICA, LLC
• Torque wrench:V.A.G 1576 
  Fig 2: Identifying Torque Wrench V.A.G 1576

  Courtesy of AUDI OF AMERICA, LLC
• Engine support bridge:10-222 A 
  Fig 3: Engine Support Bridge 10 - 222 A

  Courtesy of AUDI OF AMERICA, LLC
• Engine Support Supplement Set:T40093 
  Fig 4: Engine Support - Supplement Set T40093

  Courtesy of AUDI OF AMERICA, LLC
• Engine/transmission jack:V.A.G 1383 A 
  Fig 5: Engine & Transmission Jack VAG 1383 A

  Courtesy of AUDI OF AMERICA, LLC
• Wheel hub support:T10149 
  Fig 6: Identifying Wheel Hub Support T10149

  Courtesy of AUDI OF AMERICA, LLC
• Tensioning strap:T10038 
  Fig 7: Identifying Special Tools -- Tensioning Belt T10038

  Courtesy of AUDI OF AMERICA, LLC
• Ball joint puller:T40010 A 
  Fig 8: Ball Joint Puller T40010 A

  Courtesy of AUDI OF AMERICA, LLC
• Assembly tool:3301 
  Fig 9: Assembly Tool 3301

  Courtesy of AUDI OF AMERICA, LLC
• Assembly tool:3348 
  Fig 10: Assembly Tool 3348

  Courtesy of AUDI OF AMERICA, LLC
• Ring Spanner Insert VAG 1332/10:V.A.G 1332/10 
  Fig 11: Identifying Ring Spanner Insert V.A.G 1332/10

  Courtesy of AUDI OF AMERICA, LLC
• or Ring spanner insert:V.A.G 1332/7 
  Fig 12: Identifying Ring Insertion Tool V.A.G 1332/7

  Courtesy of AUDI OF AMERICA, LLC
• Assembly tool:T10230 
  Fig 13: Assembly Tool T10230

  Courtesy of AUDI OF AMERICA, LLC
• Separating device:Kukko 15/3 with 17/3 
  Fig 14: Commercially Available Puller Set

  Courtesy of AUDI OF AMERICA, LLC
• Punch:VW 412 
  Fig 15: Identifying Punch VW 412

  Courtesy of AUDI OF AMERICA, LLC
• Assembly tool:3346 
  Fig 16: Assembly Tool 3346

  Courtesy of AUDI OF AMERICA, LLC
• Assembly tool:T10030 
  Fig 17: Assembly Tool T10030

  Courtesy of AUDI OF AMERICA, LLC
• Sleeve:VW 463/2 
  Fig 18: Identifying Press Piece VW 463/2

  Courtesy of AUDI OF AMERICA, LLC
• Sleeve:3144 
  Fig 19: Assembly Tool Press Support-R and I Wheel Bearings 3144

  Courtesy of AUDI OF AMERICA, LLC
• Shop press:V.A.G 1290A 
  Fig 20: Identifying Shop Press V.A.G 1290 A

  Courtesy of AUDI OF AMERICA, LLC
• Spring compressor:V.A.G 1752/1 
• Spring mounting tool:V.A.G 1752/2 
  Fig 21: Identifying Spring Compressor Kit V.A.G 1752

  Courtesy of AUDI OF AMERICA, LLC
• Spring holder:V.A.G 1752/7 
  Fig 22: Identifying Spring Compressor Kit V.A.G 1752/3-7

  Courtesy of AUDI OF AMERICA, LLC
• Knurled bolt from:V.A.G 1752/18 
• Rod, extended:V.A.G 1752/18-3 
• Clamping jaw:V.A.G 1752/19-1 
• Suspension strut adjustment gauge:V.A.G 1752/19 
• Shock absorber set:T10001/3 
  Fig 23: Identifying Shock Absorber Set T10001

  Courtesy of AUDI OF AMERICA, LLC
• Shock absorber set:T10001/4 
• Shock absorber set:T10001/7 
• Shock absorber set:T10001/11 
• Slide hammer - complete set:VW 771 
  Fig 24: Adapter VW 771/40 From Slide Hammer-Complete Set VW 771

  Courtesy of AUDI OF AMERICA, LLC
• Assembly device:T40018  for triple roller joint AAR 3300 i
  Fig 25: Assembly Device T40018 For Triple Roller Joint AAR 3300 i

  Courtesy of AUDI OF AMERICA, LLC
• Assembly device:T40084  for triple roller joint AAR 2600 i
  Fig 26: Assembly Device T40084 For Triple Roller Joint AAR 2600 i

  Courtesy of AUDI OF AMERICA, LLC

Fig 27: Identifying Special Tools -- 65 Mm Guide Link Bearing, Replacing

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Thrust plate:VW 402 
• Punch:VW 407 
• Press tool:3345 
• Assembly tool:3347/1 

Fig 28: Identifying Special Tools - Axle Shaft Assembly

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Thrust plate:VW 401 
• Thrust plate:VW 402 
• Punch:VW 408 A 
• Punch:VW 411 
• Tube:VW 416 B 
• Thrust pad:VW 447 H 

Fig 29: Identifying Special Tools

Courtesy of AUDI OF AMERICA, LLC

Special tools and workshop equipment required 

• Hose clamp pliers:V.A.G 1275 
• Torque wrench:V.A.G 1331 
• Torque wrench:V.A.G 1332 
• CV joint boot clamp tool:V.A.G 1682 
• Assembly tool:T10065