Bearing, Removing

Fig 1: Hold Track Control Arm Firmly In Position While Pressing Bearing Out And In

Courtesy of AUDI OF AMERICA, LLC

-- Remove track control arm. Refer to TRACK CONTROL ARM .

-- Mark the installation depth -arrow- on the bearing -1-.

Use a waterproof felt-tip pen.

-- Install the special tools as shown in the illustration.

1. :VW 412 
2. Thrust piece:T10030/1 
3. Rubber bushing
4. Control Arm
5. Support sleeve:3301/3 
6. Assembly tool:3301/1 
7. :VW 402 

-- Press bearing -3- out of track control arm -4-.

Fig 1: Hold Track Control Arm Firmly In Position While Pressing Bearing Out And In

Courtesy of AUDI OF AMERICA, LLC

-- Remove track control arm. Refer to TRACK CONTROL ARM .

-- Mark the installation depth -arrow- on the bearing -3-.

Use a waterproof felt-tip pen.

-- Install the special tools as shown in the illustration.

1. :VW 412 
2. :3346 
3. Rubber bushing
4. Control arm
5. Support sleeve:3301/4 
6. Assembly tool:3301/1 
7. :VW 402 

-- Press bearing -3- out of track control arm -4-.