Removing Bushing
WARNING: This page is about a different variant/trim than selected.
- The guide link is removed. Refer to GUIDE LINK .
-- Mark the installed position -arrow- on the hydraulic bonded rubber bushing -4-.
Use a water-proof marker.
-- Order the special tools as illustrated.
- :V.A.G 1290A punch
- :VW 412
- Sleeve:VW 463/2
- Hydraulic bonded rubber bushing
- Guide link
- :3144
- :VW 402
-- Remove the hydraulic bonded rubber bushing -4- from the guide link -5-.
NOTE:
Hold the guide link steady when removing/installing the hydraulic bonded rubber bushing.