Suspension Strut And Mounting Bracket: Overview
WARNING: This page is about a different variant/trim than selected.
- Nut
- 50 Nm
- Always replace if removed.
- Shock Absorber Mounting
- Washer
- Mounting Bracket
- Upper Spring Support
- Coil Spring
- Removing, refer to Figure
- Installing, refer to Figure
- Note different types of suspension versions, see vehicle data plate. Refer to PRODUCTION CONTROL NUMBER (PR NUMBER) EXPLANATIONS .
- Allocation, refer to Parts Information..
- Additional Spring
- Protective Sleeve
- Protective Cap
- Lower Spring Support
- Lower Spring Plate
- Shock Absorbers
- Replacing, refer to Figure.
- Note different types of suspension versions, see vehicle data plate. Refer to PRODUCTION CONTROL NUMBER (PR NUMBER) EXPLANATIONS .
- Always release gas and drain malfunctioning shock absorbers before disposal.
- Allocation, refer to Parts Information..
The shock absorber combination installed in the vehicle is indicated by the corresponding PR number on the vehicle data plate.