LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Front Suspension (Removal & Installation) (Coupe)) >> 40 Front Suspension >> Disassembly And Assembly >> PEENED Triple Roller Joint AAR 2600 I Or 3300 I >> Distinguishing Characteristic Of Drive Axle AAR 2600 I To AAR 3300 I >> Triple Roller Joint AAR 2600 I Or 3300 I, Assembling

Triple Roller Joint AAR 2600 I Or 3300 I, Assembling

WARNING: This page is about a different variant/trim than selected.

-- Slide on the small clamp with the protective boot and position the protective boot on the drive axle according to the version.

Version with Identification Groove

Fig 1: Identifying Circlip And Grooves
GWWA40-10020Courtesy of AUDI OF AMERICA, LLC

-- Position CV boot in outer groove -arrow B-.

Inner groove -arrow A- remains visible "identification groove" (for correct installation of CV boot).

scientia non olet · About LEMON Manuals