LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S5 Prestige, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 43 (Front Suspension (Removal & Installation) (Coupe)) >> 40 Front Suspension >> Diagnosis And Testing >> Outer CV Joint, Checking >> Assembling

Outer CV Joint, Checking: Assembling

WARNING: This page is about a different variant/trim than selected.

-- Insert cage with hub into joint body.

NOTE:

Cage must be installed laterally correct.

-- Press in opposing balls in sequence, during this, previous position of ball hub to ball cage and to joint body must be established again.

-- Press the grease into the joint body. Refer to DRIVE AXLE OVERVIEW .