Power Steering Gear, Emptying
WARNING: This page is about a different variant/trim than selected.
NOTE:
The Room Temperature Must Be At Least 20° C (68 °F) When Emptying The Power Steering Gear.
-- Hold the power steering gear that will be opened over the oil collecting container and let the hydraulic oil drain.
-- Clamp the power steering gear horizontally in the vise with the connections facing down.
-- Place the oil collecting container under the power steering gear.
-- Move the steering rack over the tie rod approximately 6 times over the from one end to the other.
-- Dispose of the power steering gear.